FILE NAME: kmod-mptbase-4.00.13.09-3.el6.i686.rpm TITLE: HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe HBA series (x86) Driver for Red Hat Enterprise Linux 6 (x86) VERSION: 4.00.13.09-3 LANGUAGE: English CATEGORY: Storage Controllers DIVISION: N/A OPERATING SYSTEM: Red Hat Enterprise Linux 6 (x86) ELECTRONIC DISTRIBUTION ALLOWED: Yes DESCRIPTION: This RPM is used to provide binary driver modules that have been pre-built for Red Hat Enterprise Linux 6 (x86) to enable the HP ProLiant 64-bit/133-MHz Dual Channel Ultra320 SCSI HBA and HP U320 64-Bit Single Channel SCSI G2 HBA, HP U320 64-Bit Single Channel SCSI HBA, HP 8 Internal Port SAS/SATA HBA with RAID and HP 4 Internal Port SAS HBA with RAID, HP SCxxXe and SCxxGe series of HBA. This RPM provides a customer friendly approach to install a pre-built binary driver. FIXES * Tue Nov 23 2010 Linux Storage Driver Team 4.00.13.09-3 * Mon Nov 1 2010 Linux Storage Driver Team 4.00.13.09-2 ENHANCEMENTS * Tue Nov 23 2010 Linux Storage Driver Team 4.00.13.09-3 - Automatically trigger the kdump initrd to be rebuilt when mptbase rpm is installed. * Mon Nov 1 2010 Linux Storage Driver Team 4.00.13.09-2 - Added support for Red Hat Enterprise Linux 6. SUPPORTED KERNELS: The kernels of Red Hat Enterprise Linux 6 (x86) supported by this binary rpm are: 2.6.32-71.el6 - Red Hat Enterprise Linux 6 (x86) and future update kernels SUPPORTED DEVICES AND FEATURES HP SC08Ge SAS Host Bus Adapter HP SC40Ge Host Bus Adapter HP SC44Ge Host Bus Adapter HP 8 Port SAS/SATA Controller with RAID HP SC11Xe Host Bus Adapter HP ProLiant (100 Series) 64-Bit/133-MHz Single Channel Ultra320 Adapter HP U320 64bit Single Channel SCSI Host Bus Adapter G2 Dual Channel Ultra320 SCSI HBA Modular Smart Array 2012sa INSTALLATION Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory. To install or upgrade the driver type: # rpm -Uvh kmod-base-4.00.13.09-3.el6.i686.rpm Setup is now complete. Please REBOOT your computer NOW!! NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command: # rpm -e kmod-base-4.00.13.09-3.el6.i686 The removal of the RPM restores the system back to mpt*.ko modules that are included in Red Hat Enterprise Linux 6. IMPORTANT: This KMOD RPM will install binary driver that supports Red Hat Enterprise Linux 6 and the errata kernels made available for this release. Once installed these drivers will be carried forward with each errata kernel upgrade using facilities included in Red Hat Enterprise Linux 6. This is a big improvement from previouse releases allowing the customer to not wait on driver updates when errata kernels are released. NOTES MD5SUM: b1389cf1fd05340a454ceb88a8216ab9 Feedback -------- To provide kernel/driver development feedback send email to iss_storagedev@hp.com Customer Service ---------------- For support for ProLiant Smart Array controllers, please visit http://welcome.hp.com/country/us/en/contact_us.html Copyright 2002-2010 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies.