FILE NAME: CP020134.scexe TITLE: HP Intel Online Firmware Upgrade Utility for Linux x86 VERSION: 1.5.17 REVISION: 0 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 12/16/2013 SUPERSEDES: CP018870.scexe Products Affected ================== HP Ethernet 1Gb 2-port 361i Adapter HP Ethernet 1Gb 2-port 361T Adapter HP Ethernet 1Gb 2-port 361FLB Adapter HP Ethernet 1Gb 4-port 366i Adapter HP Ethernet 1Gb 4-port 366M Adapter HP Ethernet 10Gb 2-port 560FLB Adapter HP Ethernet 10Gb 2-port 560SFP+ Adapter HP Ethernet 1Gb 4-port 366FLR Adapter HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter HP Ethernet 10Gb 2-port 560M Adapter HP Ethernet 10Gb 2-port 561FLR-T Adapter HP Ethernet 10Gb 2-port 561T Adapter HP Ethernet 10Gb 1-port P560SFP+ Adapter HP Ethernet 1Gb 2-port 363i Adapter HP Ethernet 1Gb 1-port 364i Adapter HP Ethernet 1Gb 2-port 367i Adapter HP Ethernet 10Gb 2-port 562i Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 5 for x86 Red Hat Enterprise Linux 6 Update 4 for x86 Red Hat Enterprise Linux 5 Update 10 for x86 Red Hat Enterprise Linux 5 Update 9 for x86 SUSE LINUX Enterprise Server 11 Service Pack 3 for x86 SUSE LINUX Enterprise Server 11 Service Pack 2 for x86 Pre-requisites =============== ProLiant server supporting above operating systems 2GB RAM minimum hp-igb source rpm >= 3.1.16-3 Description ============ This scexe contains the utilities and binaries for upgrading Firmware on HP Proliant Intel adapters on server running any of the supported OS versions above Enhancements/Fixes =================== - Enhancements Description: - Added support for following adapters: HP Ethernet 1Gb 2-port 363i Adapter HP Ethernet 1Gb 1-port 364i Adapter HP Ethernet 1Gb 2-port 367i Adapter HP Ethernet 10Gb 2-port 562i Adapter - This component contains combo image version 1.464.0 with UEFI support. The combo image includes: Boot Agent: 1GbE - v1.5.43, 10GbE - v2.3.15 & UEFI Drivers: 1GbE - v4.3.04, 10GbE - v6.1.02. - Fixes Description: - Firmware Fixes: - FW changes w.r.t to 1.399.0 : * Fix the hang seen with Product Development Kit Intel® APITEST with PXE 1.5.33. * Fix an issue where the Windows Deployment Services fails due to PXE passing dhcp option 61 with invalid UUID. * Fix an issue where the PXE boot was failing when the Spanning Tree Protocol was enabled on network switch. Table of Contents ================= Introduction Packaging Performing the Firmware Upgrade Firmware Upgrade Log Introduction ============ This file describes the procedure to use for upgrading firmware on HP network adapters mentioned in the PRODUCTS AFFECTED section of this document. User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Packaging ========= This firmware upgrade utility is released in SCEXE format. The file is a single self-extracting executable that unpacks the component, runs it, and cleans up. This one-step process replaces the rpm format which would require three steps to install, execute and remove. Performing the Firmware Upgrade =============================== 1. Firmware can be upgraded interactively using following command: # ./CPxxxxxx.scexe 2. The help menu lists all available command line options. # ./CPxxxxxx.scexe -h NOTE: Under certain scenarios, after updating the EPROM you may be required to reboot the unit and re-run this component to be able to update the flash ROM (OROM) on the adapters. Firmware Upgrade Log ==================== The results of the firmware upgrade are in the CPxxxxxx.log which will be written to the /var/cpq/ directory. Copyright 2011 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies