FILE NAME: CP021556.scexe TITLE: HP QLogic P3P Online Firmware Upgrade Utility for Linux i386 VERSION: 1.4.19 REVISION: 0 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 08/20/2013 SUPERSEDES: CP021220.scexe Products Affected ================== HP CN1000Q Dual Port Converged Network Adapter HP NC523SFP Dual port 10GbE Server Adapter HP FlexFabric 10Gb 2-port 526FLR-SFP+ Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 4 for x86 Red Hat Enterprise Linux 6 Update 3 for x86 Red Hat Enterprise Linux 6 Update 2 for x86 Red Hat Enterprise Linux 5 Update 9 for x86 Red Hat Enterprise Linux 5 Update 8 for x86 SUSE LINUX Enterprise Server 11 Service Pack 3 for x86 SUSE LINUX Enterprise Server 11 Service Pack 2 for x86 Pre-requisites =============== None Description ============ This package contains the utilities and binaries for upgrading HP ProLiant QLogic P3P 10Gb Ethernet NICs ROM images running under Linux i386 platform. Enhancements/Fixes =================== - Enhancements Description: - Firmware Enhancements: - This component provides firmware version 4.14.26. This firmware is part of a combo image file p3p11351.bin (v 1.13.51) that the component uses to update to this firmware. Therefore users will see information about the combo image versions in the interactive mode. - Fixes Description: - Firmware Fixes: - FW fixes in 4.14.26 w.r.t to 4.14.25 : * The firmware fixes an issue where the MAC address (that ends with '00') is incorrectly displayed in the ROM-Based Setup Utility (RBSU) and HP Integrated Lights-Out (iLO). Table of Contents ================= Introduction Packaging Performing the Firmware Upgrade Firmware Upgrade Log Introduction ============ This file describes the firmware upgrade of HP Gigabit Server Adapters mentioned in the PRODUCTS AFFECTED section of this document. User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Packaging ========= The firmware upgrade utility is released in scexe format. The file is a single self-extracting executable that unpacks the component, runs it, and cleans up. Performing the Firmware Upgrade =============================== 1. The firmware can be upgraded interactively using the following command: #./CPxxxxxx.scexe 2. Check the help menu for more information regarding command line options. #./CPxxxxxx.scexe -h Firmware Upgrade Log ==================== Results of the firmware upgrade are written to /var/cpq/CPxxxxxx.log. Copyright 2013 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies