FILE NAME: CP015144.scexe TITLE: HP NC-Series Broadcom Online Firmware Upgrade Utility for Linux x86_64 VERSION: 2.4.25 REVISION: 0 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 12/22/2011 SUPERSEDES: CP014348.scexe Products Affected ================== HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter HP Flex-10 10Gb 2-port 530FLB Adapter HP Flex-10 10Gb 2-port 530M Adapter HP Ethernet 1Gb 4-port 331FLR Adapter HP Ethernet 1Gb 4-port 331T Adapter HP Ethernet 1Gb 4-port 331i Adapter HP NC1020 Gigabit Server Adapter HP NC6770 Gigabit Server Adapter HP NC7760 Gigabit Server Adapter HP NC7761 Gigabit Server Adapter HP NC7770 Gigabit Server Adapter HP NC7771 Gigabit Server Adapter HP NC7780 Gigabit Server Adapter HP NC7781 Gigabit Server Adapter HP NC7782 Gigabit Server Adapter HP NC150T PCI 4-Port Gigabit Combo Switch Adapter HP NC320T PCIe Gigabit Server Adapter HP NC320I PCIe Gigabit Server Adapter HP NC320M PCIe Adapter HP NC324I PCIe Dual Port Gigabit Server Adapter HP NC325M PCIe Quad Port Gigabit Server Adapter HP NC326I PCIe Dual Port Gigabit Server Adapter HP NC326M PCIe Dual Port Adapter HP NC370T Multifunction Gigabit Server Adapter HP NC370F Multifunction Gigabit Server Adapter HP NC370i Multifunction Gigabit Server Adapter HP NC371i Multifunction Gigabit Server Adapter HP NC373T PCIe Multifunction Gig Server Adapter HP NC373F PCIe Multifunction Gig Server Adapter HP NC373i PCIe Multifunction Gig Server Adapter HP NC373m PCIe Multifunction Gig Server Adapter HP NC374m PCIe Multifunction Adapter HP NC380T PCIe DB Mulitfunc Gig Server Adapter HP NC382i DP Multifunction Gigabit Server Adapter HP NC382T PCIe DP Multifunction Gigabit Server Adapter HP NC382m DP 1GbE Multifunction BL-c Adapter HP NC532i Dual Port 10GbE Multifunction BL-c Adapter HP NC532m Dual Port 10GbE Multifunction BL-c Adapter HP NC105i PCIe Gigabit Server Adapter HP NC107i PCIe Gigabit Server Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 2 for AMD64/EM64T Red Hat Enterprise Linux 6 Update 1 for AMD64/EM64T Red Hat Enterprise Linux 6 for AMD64/EM64T Red Hat Enterprise Linux 5 Update 7 for AMD64/EM64T Red Hat Enterprise Linux 5 Update 6 for AMD64/EM64T SUSE LINUX Enterprise Server 11 Service Pack 1 for AMD64/EM64T SUSE LINUX Enterprise Server 11 for AMD64/EM64T SUSE LINUX Enterprise Server 10 Service Pack 4 for AMD64/EM64T SUSE LINUX Enterprise Server 10 Service Pack 3 for AMD64/EM64T Pre-requisites =============== ProLiant server supporting above operating systems 2GB RAM minimum tg3 Linux driver version >= 3.58b bnx2 Linux driver version >= 1.4.41 bnx2x Linux driver version >= 1.45.19 Description ============ This scexe contains the utilities and binaries for upgrading HP ProLiant Gigabit Ethernet NICs boot code, PXE, IPMI, UMP, CLP, and iSCSI code running under Linux x86 platform. Enhancements/Fixes =================== 1) Added support for HP Ethernet 1Gb 4-port 331FLR Adapter 2) Added support for HP Ethernet 1Gb 4-port 331T Adapter 3) Added support for HP Ethernet 1Gb 4-port 331i Adapter 4) Added support for HP Ethernet 10Gb 2-port 530FLR-SFP+ Adapter 5) Added support for HP Flex-10 10Gb 2-port 530FLB Adapter 6) Added support for HP Flex-10 10Gb 2-port 530M Adapter 7) Updates bootcode for NC532x devices to v6.2.10 8) FIX: NVRAM read failure during CLP FW update on 465 G6 NC370i Table of Contents ================= Introduction Packaging Performing the Firmware Upgrade Firmware Upgrade Log Configure IPMI: Disable/Enable Introduction ============ This file describes the procedure to use for upgrading firmware on HP Gigabit Server Adapters mentioned in the PRODUCTS AFFECTED section of this document. User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Packaging ========= This firmware upgrade utility is released in SCEXE format. The file is a single self-extracting executable that unpacks the component, runs it, and cleans up. This one-step process replaces the rpm format which would require three steps to install, execute and remove. Performing the Firmware Upgrade =============================== 1. This utility requires the ethernet interface to be up. You can bring up an ethernet interface by using the following command: # ifup ethx or # ifconfig ethx up 2. Firmware can be upgraded interactively using following command: # ./CP00xxxx.scexe 3. The help menu lists all available command line options. # ./CP00xxxx.scexe -h Firmware Upgrade Log ==================== Results of the firmware upgrade are written to nicfwupg.log which gets saved in the current working directory. Configure IPMI: Disable/Enable ============================== 1. This utility requires the ethernet interface to be up. You can bring up an ethernet interface by using the following command: # ifup ethx or # ifconfig ethx up 2. Verify current configuration status using the following command: # ./CP00xxxx.scexe -c 3. Configure IPMI by sending the following command: # ./CP00xxxx.scexe [ interface ] ipmi [ options ] options: 0 - Disable IPMI 1 - Enable IPMI Example: The following command disables IPMI # ./CP00xxxx.scexe eth0 ipmi 0 Note: Please refer to the adapter QuickSpecs for information on supported features. Copyright 2011 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies