hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1 > t
D H ` p U,5ݍd'^i;g=7WnЁ
eu{N6M6MM5%&ph@<'ߑ0q:BʒVܝ$7 Rğhj7=!֛Ef^`XO5_\eS.u/)CK Sa6>I1梑?錥=7̍)Gm.
6黹dhÂ^h=g 9acc4ba0b174218663fd2ff6d25c851578ab331d ` U,4ݍd'^/
XSZ 9wd/c_$+,rmPdaB4{&f
VVA
,ͺ<[KLדl2%K_h-TpJ4Qe!3bxucp%zH-|tfjuSXyϯd67Xl{%4aYi5J}`6VDG{JB'^sP0t+y-$Y5)p;ۍ65QydLzרyƪF~3~f:>?= ( > 5 n: ? n* d ) / 3 ( , D s `4
`h
`
`
`
b
b,
b`
b
b c
cP d e gi ( g > g @ g G g
H g
I h
X h, Y hH \ hh
] h
^ i b j d k e k f k k k l k k, n" C hp-firmware-nic-mellanox-ethernet-only 1.0.0 2.1 Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters firmware This package contains the Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters firmware T(ibscbuild.ind.hp.com (Hewlett-Packard Company 2012 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company Applications/System http://www.hp.com/go/proliantlinux linux x86_64
# create marker files so that we only run hp-fm once per transaction
mkdir -p /var/lib/rpm-state/hp-firmware/
touch /var/lib/rpm-state/hp-firmware/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1 # clean up our directory
if [ -d "/usr/lib/x86_64-linux-gnu/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1" ] ; then
rm -rf "/usr/lib/x86_64-linux-gnu/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1"
fi
if [ -d /etc/hp-firmware/postrm.d ]; then
for i in /etc/hp-firmware/postrm.d/*.sh; do
if [ -r $i ]; then
sh $i
fi
done
unset i
fi
# surface XML so hpsum doesn't need to extract the package
cat<<__ENDCPXML__>>/dev/null
CP025807.scexe
Networking
网络
ネットワーク
네트워킹
網路
Server
服务器
サーバ
서버
伺服器
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 5 Server (x86-64)
SUSE LINUX Enterprise Server 11 (AMD64/EM64T)
SUSE LINUX Enterprise Server 10 (AMD64/EM64T)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 12
Firmware - Network
固件 - 网络
ファームウェア - ネットワーク
펌웨어 - 네트워크
韌體 ─ 網路
Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters
用于仅使用太网适配器的HP Mellanox的在线固件升级实用程序(Linux x86_64)
オンラインファームウェアアップグレードユーティリティ(Linux x86_64) for HP Mellanox Ethernetアダプター専用
HP Mellanox 이더넷 전용 어댑터의 온라인 펌웨어 업그레이드 유틸리티(Linux x86_64)
線上韌體升級公用程式 (Linux x86_64),僅適用於 HP Mellanox 乙太網路配接卡
Online Firmware Upgrade Utility (Linux x86_64) for HP Mellanox Ethernet only adapters
用于仅使用太网适配器的HP Mellanox的在线固件升级实用程序(Linux x86_64)
オンラインファームウェアアップグレードユーティリティ(Linux x86_64) for HP Mellanox Ethernetアダプター専用
HP Mellanox 이더넷 전용 어댑터의 온라인 펌웨어 업그레이드 유틸리티(Linux x86_64)
線上韌體升級公用程式 (Linux x86_64),僅適用於 HP Mellanox 乙太網路配接卡
Hewlett-Packard Development Company, L.P.
Hewlett-Packard Development Company, L.P.
Hewlett-Packard Development Company, L.P.
Hewlett-Packard Development Company, L.P.
Hewlett-Packard Development Company, L.P.
English (US)
英語(US)
영어(미국)
英语(美国)
美式英文
Updating firmware with rpm installed:
-
Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
-
The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder.
-
From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
-
To uninstall, run: rpm -e <rpm_package_name>
Updating firmware without installing rpm:
-
Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
-
This will extract the contents of the rpm to 'usr' folder in the current directory.
-
From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
]]>
Updating firmware with rpm installed:
-
Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
-
The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder.
-
From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
-
To uninstall, run: rpm -e <rpm_package_name>
Updating firmware without installing rpm:
-
Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
-
This will extract the contents of the rpm to 'usr' folder in the current directory.
-
From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
]]>
Updating firmware with rpm installed:
-
Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
-
The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder.
-
From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
-
To uninstall, run: rpm -e <rpm_package_name>
Updating firmware without installing rpm:
-
Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
-
This will extract the contents of the rpm to 'usr' folder in the current directory.
-
From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
]]>
Updating firmware with rpm installed:
-
Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
-
The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder.
-
From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
-
To uninstall, run: rpm -e <rpm_package_name>
Updating firmware without installing rpm:
-
Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
-
This will extract the contents of the rpm to 'usr' folder in the current directory.
-
From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
]]>
Updating firmware with rpm installed:
-
Install the RPM as: rpm -ivh <rpm_filename>.rpm. This will extract the contents to the '/usr/lib/x86_64-linux-gnu' location.
-
The CPxxxxxx.scexe script will be located in the 'hp-scexe-compat' folder.
-
From the terminal, you can either call the "./CPxxxxxx.scexe" under '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR) "./hpsetup" under 'hp-firmware-nic-*' location, to update the firmware (The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed).
-
To uninstall, run: rpm -e <rpm_package_name>
Updating firmware without installing rpm:
-
Extract the contents of the rpm as: rpm2cpio <rpm_filename>.rpm | cpio -id
-
This will extract the contents of the rpm to 'usr' folder in the current directory.
-
From the terminal, navigate to 'usr/lib/x86_64-linux-gnu/hp-firmware-nic-*' location and run "./hpsetup" to update the firmware. The actual name of the 'hp-firmware-nic-*' folder is determined based on the rpm installed.
]]>
This software package contains the following firmware versions:
InfiniBand Card Type |
Firmware Version |
PSID |
HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) |
2.32.5430 |
HP_1200111023 |
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) |
2.32.5430 |
HP_2240110004 |
]]>
This software package contains the following firmware versions:
InfiniBand Card Type |
Firmware Version |
PSID |
HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) |
2.32.5430 |
HP_1200111023 |
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) |
2.32.5430 |
HP_2240110004 |
]]>
This software package contains the following firmware versions:
InfiniBand Card Type |
Firmware Version |
PSID |
HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) |
2.32.5430 |
HP_1200111023 |
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) |
2.32.5430 |
HP_2240110004 |
]]>
This software package contains the following firmware versions:
InfiniBand Card Type |
Firmware Version |
PSID |
HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) |
2.32.5430 |
HP_1200111023 |
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) |
2.32.5430 |
HP_2240110004 |
]]>
This software package contains the following firmware versions:
InfiniBand Card Type |
Firmware Version |
PSID |
HP Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) |
2.32.5430 |
HP_1200111023 |
HP Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) |
2.32.5430 |
HP_2240110004 |
]]>
Firmware for the following devices are updated to 2.32.5430:
779799-B21
779793-B21
]]>
Firmware for the following devices are updated to 2.32.5430:
779799-B21
779793-B21
]]>
Firmware for the following devices are updated to 2.32.5430:
779799-B21
779793-B21
]]>
Firmware for the following devices are updated to 2.32.5430:
779799-B21
779793-B21
]]>
Firmware for the following devices are updated to 2.32.5430:
779799-B21
779793-B21
]]>
firmware:nic
15B3
1007
103C
8020
15B3
1007
103C
801F
Fri, 23 Jan 2015 08:45:36
2.1
1
False
nic-mellanox-ethernet-only
hp-firmware-nic-mellanox-ethernet-only
nic-mellanox-ethernet-only
smartcomponent-linux-firmware-generic
hp-firmware-nic-mellanox-ethernet-only
hp-firmware-nic-mellanox-ethernet-only
2.1
__ENDCPXML__ = [ 8 ( P gA큤큤A큤A T(T(T(T(T(T(T(T(T(T(T(T(T( e5ce1256956338dc5f9f0cf0ccf88f00 3907730eecca7f6dbdf2b65aadf0d7ba 5d441939bf6a2d7403d7987351a11a73 235a38b26eacf0a05ae1bc9685658886 3e4c187c0d6f4987a78e87516be84785 652ec92856a55c202dc38925c5c2d9fb 0abd43b7a776374f266a0db7bd5266cc cf9098a5d8efddd2ce2eee24e9b2cf4f bdd5db5b34ed06eec0b41f94b2f966d7 ca661defa04286e56bed086eec26cc21 root root root root root root root root root root root root root root root root root root root root root root root root root root hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1.src.rpm firmware(hp:nic:mellanox_nic) firmware(hp:nic:mellanox_nic) firmware(pci:v000015B3d00001007sv0000103Csd00008020bc*sc*i*) firmware(pci:v000015B3d00001007sv0000103Csd00008020bc*sc*i*) firmware(pci:v000015B3d00001007sv0000103Csd0000801Fbc*sc*i*) firmware(pci:v000015B3d00001007sv0000103Csd0000801Fbc*sc*i*) hp-firmware-nic-mellanox-ethernet-only J @ @ J J @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ Jrpmlib(VersionedDependencies) /bin/sh /bin/sh /bin/sh rpmlib(PayloadFilesHavePrefix) rpmlib(CompressedFileNames) /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libc.so.6(GLIBC_2.7)(64bit) libdl.so.2()(64bit) libdl.so.2(GLIBC_2.2.5)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libm.so.6()(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.11)(64bit) libstdc++.so.6(GLIBCXX_3.4.9)(64bit) libxml2.so.2()(64bit) libz.so.1()(64bit) rpmlib(PayloadIsBzip2) 3.0.3-1 4.0-1 3.0.4-1 3.0.5-1 4.4.2 /bin/sh /bin/sh h h h h h h h h h h h h h 1.0.0 1.0.0 1.0.0 1.0.0-2.1 hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1 .cpq_package.inc .hpsetup CP025807.xml getmlnxinfo hpsetup nic_fw NICFWData.xml fw-ConnectX3Pro-rel-2_32_5430-779793-B21_Ax-FlexBoot-3.4.306-CLP-8025-UEFI-13.5.40.bin fw-ConnectX3Pro-rel-2_32_5430-779799-B21_Ax-FlexBoot-3.4.306-CLP-8025-UEFI-13.5.40.bin mstflint hp-scexe-compat CP025807.scexe /usr/lib/x86_64-linux-gnu/ /usr/lib/x86_64-linux-gnu/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1/ /usr/lib/x86_64-linux-gnu/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1/nic_fw/ /usr/lib/x86_64-linux-gnu/hp-scexe-compat/ -O2 -g -fmessage-length=0 -D_FORTIFY_SOURCE=2 cpio bzip2 9 x86_64 x86_64-suse-linux LAST=
if [ -f "/var/lib/rpm-state/hp-firmware/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1" ] ; then
rm -f "/var/lib/rpm-state/hp-firmware/hp-firmware-nic-mellanox-ethernet-only-1.0.0-2.1"
if [ -z "$(find /var/lib/rpm-state/hp-firmware -type f)" ] ; then
LAST=1
fi
fi
# only run once per transaction
if [ -n "${LAST}" ] ; then
if [ -d /etc/hp-firmware/postinst.d ]; then
for i in /etc/hp-firmware/postinst.d/*.sh; do
if [ -r $i ]; then
sh $i
fi
done
unset i
fi
#
# Display EULA stuff here
#
echo ""
echo ""
echo "HP recommends using HP Smart Update Manager (SUM) to apply firmware"
echo "to identify missing requirements and avoid issues"
echo ""
echo ""
fi /bin/sh ? BZh91AY&SY .kx旽Gwۀ
=s1(hif,wC3C6MV %
QB i*U1MB EAֵ t*֠J -kL(")M[.>i"QD
@I m Hڛ[n#mn)ѝYmU@Z
bbdilfȦ
H*R hkh@" 뮚4K2"4nGv.qjѶдŪe.mXƂB5`iU 6
˘w