# changelog

author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      This firmware version updates the Vendor ID in the standard inquiry to 'HPE', in previous versions it was 'HP.'


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-3.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fix command timeout and uncorrectable error improvement.
        * Added features for SAS4 auto power swtiching and thermal requirement.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      FW update to eliminate the risk of data error at unexpected power-off during specific I/O combination.
        * Adjust SoC clock in fw to bridge the LBA info. transfer timing gap and remove the risk of buffer CRC error.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3-2.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -     This firmware revision corrects a rare situation where a Cryptographic Erase
      could result in random data instead of the expected deterministic zeros. This
      is judged as low severity because it does not compromise user data or
      security, but justifies the update to preclude potential security concerns.
      There are several items that reduce the probability of hangs and provide some
      minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-3.1
changelog:
  -      Online firmware flashing of drives attached to aSmart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiantand Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like(B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2
changelog:
  -     This FW release deploys an Enhanced Media Scan algorithm that addresses an
      issue when the host system does not provide enough idle time for drive's
      Foreground Media Scan to be activated, which is needed to ensure long term
      drive reliability. It also addresses few minor issues.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      The updates were included in a regularly scheduled 5300 maintenance release. This firmware has a security version upgrade to include TCGe SKUs and prevent a downloading of a back level firmware version of HPG0 after upgrading to HPG1.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD6
changelog:
  -      Reduced the occurrence probability of PMIC busy issue. 
        * Fixed the system data error at the drive power on issue. 
        * When the PLP operation starts, the waiting Unmap request to the 4KB not-aligned host write area is canceled to be able to complete PLP correctly.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> MPK7625Q
changelog:
  -     Please refer to SID8624 wtih the reason that why upgrade requiremnet need to
      be set to Critical


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> MPK7625Q
changelog:
  -      Contains critical fix for issue where failure to send MI command completion could result in drive reporting 0GB until power cycled.
        * For more information, refer to HPE Customer Advisory at the following URL: <https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00123725en_us>


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> MPK7625Q-2.1
changelog:
  -      Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -     This firmware version updates the Vendor ID in the standard inquiry to 'HPE',
      in previous versions it was 'HP.'


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Removed printed circuit board assembly serial number from product serial number field on VPD 80h


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG7
changelog:
  -      This firmware revision improves low-temperature performance and Error Correction Code (ECC) error recording for some commands. 
        * It also improves internal logging capabilities for failure analysis.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG8
changelog:
  -      Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      The FW version is Changed from HPG0 to HPG1. Changed the thermal throttling scheme. SMART 60 was matched with Tcase 70 and Run the thermal throttling at SMART 65.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      HPG6 introduces bug fixes, reliability enhancement and modification in SMART Attributes. Once HPG6 is downloaded, the drive cannot be changed back to an earlier firmware (eg, HPG3).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      Addresses a hot plug reporting concern
        * Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1-5.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc...


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD4
changelog:
  -      This firmware provides a change to the Vendor ID in the VPD page that refers to HP instead of HPE.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.28.60
changelog:
  -     This product now supports the following network adapters:
      
        * Broadcom BCM5719 Ethernet 1Gb 4-port Base-T Adapter for HPE
        * Broadcom BCM5719 Ethernet 1Gb 4-port Base-T OCP3 Adapter for HPE


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.8.1
changelog:
  -     *Changes and New Features in version 1.8.1.0.0 :**
      
        * Added hfi1_eprom **v10_8_0_0_13.**
        * Loader ROM **HfiPcieGen3Loader_1.8.1.0.0.rom** and driver EFI **HfiPcieGen3_1.8.1.0.0.efi** were added.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.11.0
changelog:
  -     *Fixes included in version 1.11.0:**
      
        * **The following issue has been fixed in Unified Extensible Firmware Interafce (UEFI) ROM: **On some platforms, the hfi1 device was not showing up in BIOS/UEFI boot menus and was not available as a PXE boot device. This was caused by the platform not loading the UEFI driver for the hfi1 adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12.0-2.1
changelog:
  -     *Fixes included in version 1.12.0:**
      
        * Fixed race condition between BIOS checking link status and LNI completing which resulted in PXE boot failures.
        * Changed the default behavior of the hfi1_eprom tool to convert the eprom format to version 2, eliminating the need to supply the -N command line argument.
        * Addressed an issue where updating the HfiPcieGen3Loader*.rom file could result in the erasure of HfiPcieGen3Loader*.efi and HFI_TYPE1*.dat files.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20.11
changelog:
  -      This product now supports SUSE Linux Enterprise Server 12 SP5.
        * This product now supports HPE ProLiant MicroServer Gen10 Plus and HPE ProLiant XL225n Gen10 Plus.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.21.5
changelog:
  -     This product now supports the following network adapters:
      
        * Intel X710-DA2 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE
        * Intel X710-DA2 Ethernet 10Gb 2-port SFP+ Adapter for HPE


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.11
changelog:
  -      This product now supports SUSE Linux Enterprise Server 15 SP2.
        * This product now supports Red Hat Enterprise Linux 8, Update 2 and Update 3.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22.55
changelog:
  -     This product addresses an link issue for Intel X710-DA2 Ethernet 10Gb 2-port
      SFP+ OCP3 Adapter for HPE.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.5
changelog:
  -     This product now supports Red Hat Enterprise Linux 8 update 4 and SUSE Linux
      Enterprise Server 15 Service Pack 3


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.23.50
changelog:
  -      This product addresses an issue where the incorrect translation is seen with Intel Intel I350-T4 Ethernet 1Gb 4-port BASE-T  Adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.21-1.1
changelog:
  -      A controller lockup issue occurs when clearing the configuration of an encryption-enabled controller.
        * When unconfigured drives are directly attached, the PHY ID is always 0 in the ADU report or lsscsi output.
        * A file system or application might read incorrect data when there is pending read or write operation and an array transformation is in progress on the logical drives.
        * A rekey operation on a SmartCache volume pauses when the controller firmware is upgraded and the server is warm rebooted.
        * A SMART READ DATA command sent with an out-of-band method returns a response of all zeros.
        * The Maximum Connection Number calculation for an indirectly attached wide-port end-target is incorrect.
        * A firmware exception might occur during task management abort handling for a non-NCQ SATA command.
        * A controller lockup issue might occur when the PHYs fluctuate between link up/link down status.
        * Open frames cause an I/O timeout that results in an Open Reject Bad Destination response and a host I/O timeout. This situation causes a server node to be evicted from a cluster.
        * Removing a redundant fan module in an attached JBOD causes Failed JBOD status.
        * The controller might not respond for up to 15 minutes when a drive reports a hardware failure.
        * Specifying an incorrect serial number in the API when attempting to HALON flash a drive does not result in the expected error.
        * A SmartCache write bypass might result in a cache line getting stuck on a pending queue if the write to the primary logical drive is retried.
        * A controller might not respond if it is repeatedly forced between SIS (Inbox) and PQI I/O submission modes at the same time as an I/O timeout.
        * An issue in the write coalescing logic might cause a partially coalesced opportunity to be abandoned under high queue depth workloads.
        * The OS driver reports a lockup code that does not match the code provided by the firmware.
        * SATA drives are unnecessarily reset during a power-on self-test.
        * The bay number of a non-hot-plug drive is reported as 255/0xFF when the device inventory re-query API is initiated.
        * A controller might not respond when a clear configuration action is initiated at the same time that a degraded volume is undergoing Rapid Parity Initialization.
        * I/O coalescing is not enabled when DDR cache is not present or enabled.
        * A drive incorrectly reports failed status if it is spun down and then used to create a volume with Rapid Parity Initialization.
        * SmartCache metadata is lost after a new volume is created while running I/O traffic.
        * An abnormal volume state is observed with multiple SmartCache volumes configured using 512e drives.
        * A controller might not respond during volume transformation if the backup power source goes off line, is spuriously hot-removed, or indicates a cabling error.
        * A LUN reset issue occurs during heavy write I/O workloads on cache enabled volumes.
        * An incorrect spare SSD physical drive state is reported during a rebuild.
        * An I/O latency issue occurs during periodic disk write metadata operations.
        * A drive failure code might be incorrectly updated with a generic drive failure code.
        * When an expanding SmartCache volume is migrated to another controller after an ungraceful shutdown, the volume is not configured correctly.
        * A controller might not respond when an expanding volume is migrated from a controller that supports DDR cache to a controller that does not support DDR cache.
        * In a split mirror configuration, the cache ratio is reset to the default values after a backup cable error.
        * A controller might not respond after a cold boot during volume rekeying.
        * A controller lockup issue might occur in an HBA SAS drive dual path configuration.
        * A device reset command initiated by a host utility has a timeout issue in minimum power mode.
        * If you use the identify all LED command frequently, the command might not affect all drive LEDs.
        * A controller might not respond when you run the Internal Test Unit Ready command during drive hot removal or addition.
        * A controller lock up issue might occur when resuming a rebuild operation after a reboot.
        * A surface scan inconsistency check event is not logged for RAID 1 volumes.
        * A controller lock up issue might occur when activating a spare drive for an encrypted volume during I/Os.
        * A drive that failed due to read capacity is presented to the host.
        * A periodic background drive temperature check might skip every other minute.
        * A controller lock up issue might occur during expansion after multiple subsequent attempts to abort the expansion process.
        * An unknown error occurred during execution when Recover Cache Module in SSA.
        * Encryption host management commands are processed for a SmartCache volume, even though these commands do not apply to SmartCache volumes.
        * A host might read incorrect data after an array expansion operation.
        * High severity events logged when a controller is in the critical event buffer overflow condition are not prioritized.
        * Redundant surface scan pass complete events might be posted for the same surface scan iteration if the controller is rebooted during the scan.
        * During an expander firmware upgrade (reduced functionality mode), the last management device index remains open for processing I/Os, and an I/O timeout might occur.
        * A performance drop is observed on certain queue depths for the 4 kB sequential write workload on RAID logical volumes with SmartPath and DDR caching disabled.
        * A command timeout issue occurs during expander firmware upgrade with Non-Disruptive Soft Reset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.53
changelog:
  -      Added UBM type3 backplane support
        * Added support for long device model/product ID for SATA drives.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 3.53
changelog:
  -      An issue where the controller might become unresponsive while waiting for a non-existent pre-fetch queue entry.
        * Host I/O timeouts might occur due to continuing firmware attempts to discover devices during an expander configuration.
        * A controller lockup problem (with code 0x1E10) might occur when a bad drive with an unsupported block size is connected into slot 0.
        * A Controller hangs issue when multiple hot-plug and hot remove events (drives or JBODs) were being processed.
        * A Controller hangs issue on DDR caching enabled logical volumes with sequential read towards the end of the volume.
        * A Controller hangs issue with outstanding I/Os on a degraded logical volume when the physical drive fails.
        * A Controller hangs issue if a host I/O and background consistency check simultaneously encounter a RAID-1 ADM stripe in which all drives have URE's on the same LBA.
        * A Controller hangs issue when a drive is failed from a RAID6/60 logical drive when the host issues a Clear Controller Configuration command or any other configuration change command.
        * The SSD data drive might be set offline (with reason code 0x37) when hot-remove and re-insert during a spare rebuild in progress.
        * A drive might not be exposed to the OS after reboot if the system is rebooted just after the sanitize erase finishes.
        * UBM backplanes are not detected properly when connected to specific ports (port 7 or above) in an expander card configuration.
        * A Controller hangs issue when processing idle time followed by a short burst of I/Os.
        * The controller might return the previous drive firmware version, after a drive firmware update on SATA drives.
        * The controller might fail drives (with reason code 0x49, I/O freeze timeout) during expander firmware upgrade on a multi-expander enclosure configuration.
        * Hot-added drive LED control fails on specific fan-out expander type external enclosure models.
        * sequential I/Os and the firmware coalescing logic can't get the memory.
        * Filesystem or application might read old data when SmartCache configurations encounter intermittent write I/O errors to a primary logical drive.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4.11
changelog:
  -      Fixed an issue where SSD SmartPath is not enabled on logical drives created on the same array in certain scenarios.
        * Fixed a problem where WRITE and READ fails with URE on a RAID6 volume where it could have completed successfully in certain error recovery scenarios.
        * Fixed a problem where events were not getting logged in certain scenarios.
        * Fixed an issue where a Windows memory dump process was taking longer than 30 minutes.
        * Fixed a problem in Gen10+ server where FAULT LED was not turning on for the drives failing during device discovery.
        * Fixed a problem where the critical event "Controller memory ECC error limit exceeded" was reported in the AHS IML log after upgrading to 3.53 B0 firmware build.
        * Fixed a problem where the host WRITE I/O failed on the SmartCache logical drive with UREs present on the primary logical drive.
        * Fixed an issue where the controller may be non-responsive after drive failure with SSD SmartPath enabled under a high queue depth workload.
        * Fixed a performance issue when the host is submitting large sequential IO streams at high queue depth.
        * Fixed an issue where OS filesystem is not available after making configuration changes in HII.
        * Fixed an issue where error was observed while selecting edit SmartCache Logical drive option when SmartCache logical drive is in Degraded mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.00
changelog:
  -      Added support for DMTF PLDM Monitoring and Control for enhanced thermal monitoring
        * Added support for DMTF PLDM Redfish Device Enablement for Redfish Storage, StorageController, Port, Drive, Volume, & CollectionCapabilities
        * Added support for DMTF PLDM Redfish Device Enablement for Volume POST & DEL operations
        * Added support for DMTF Redfish StorageDevice.1.0.1 Events
        * Added support in firmware to enable logical drive transformation without backup power source on the controllers supporting data preservation.
        * Added support to return NCQ Priority Information for SATA drive to host.
        * Added support to blink the drive Predictive Failure (PF) LED during Predictive Spare Rebuilding (PSR) for drives that can be safely removed and replaced without causing a logical drive failure.
        * Added support to configure default setting for the drive write cache.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.00
changelog:
  -      Fixed a rare problem where backup power status was incorrectly reporting Charging instead of Failed.
        * Fixed an issue where obsoleted SCSI pass through command fails.
        * Loss of redundant path message is incorrectly reported on logical drive failure with single domain configuration.
        * Fixed an issue where SmartPath may not be used after LUN Reset
        * Fixed a potential controller lockup 0x1BC0 during write then read I/O with drive URE's.
        * Fixed an issue that Apollo 4200 Gen10 plus LFF expander backplanes are not discovered by controller.
        * Fixed an issue that range locked SED failed with reason error erasing RAID metadata during reboot and remains failed after clear configuration.
        * Fixed an issue where the file system may read incorrect data from a degraded RAID 5 or 6 logical drive.
        * Fixed an issue where the file system or application may read incorrect data when a backup power source is discharged completely, and system power loss occurs during a transformation.
        * Fixed an issue where the drive Fault LED is not turned ON when firmware fails a bad HBA drive connected to an expander during device discovery or hot-plug.
        * Fixed an issue of auto-rebuild not starting if two drives fail at the same time on a RAID10 or RAID6 logical drive having only one "Auto-Replace Drives" spare drive.
        * Fixed an issue where the drive Fault LED is turned ON for a few seconds when multiple configured drives are hot removed from a SES enclosure and then hot added
        * Fixed an issue where rebuild did not start after multiple iterations of drive failures.
        * Fixed an issue where the controller might fail to discover devices after a cable is hot-added.
        * Fixed a potential problem of inability to delete a SmartCache write-back logical drive.
        * Fixed an issue where 0x1789 POST message error code is displayed as healthy and there is no information in HII when all logical drives in the controller are offline.
        * Fixed an issue where the last logical drive in an array cannot be deleted in UEFI configuration tool.
        * Fixed an issue where build method is not listed for RAID 6 array creation in UEFI configuration tool.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2022.08.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.01
      
      09.09.00
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      This update includes a fix that prevents unrecoverable read errors in highly localized write intensive workload, and a new servo code revision that improves performance under specific vibration conditions.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-4.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc..


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG2-7.1
changelog:
  -      Online firmware flashing of drives attached to a Smart Array controller running in Zero Memory (ZM) mode or Host Bus Adapter (HBA) is NOT supported. Only offline firmware flashing of drives is supported for these configurations.
        * Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager. 
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD7
changelog:
  -      Reduced the occurrence probability of PMIC busy issue by stopping PLP capacity check to reduce i2c access to PMIC.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2-6.1
changelog:
  -      Corrects a potential data integrity issue during unaligned write commands, only found in supplier ongoing lab testing.Includes additional fixes to improve error handling and reliability.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD8-2.1
changelog:
  -      Fixes an issue in previou version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.10
changelog:
  -      Support for AMD EPYC 9004 Series Processors.
        * Support for separate Power Domains for System and GPU based on Platform Support.
        * Incorporation of Secure Element controller on the system board for iLO to enable Transfer of Ownership. iLO6 firmware initializes and configures Secure Element with needed checks for secure transfer of ownership to OpenBMC in future.
        * IPMI changes for GPU temperature Threshold reporting.
        * iLO Redfish conformance Support - Location Indicator Active for Drive Objects.
        * iLO Redfish conformance Support - Power Subsystem and Thermal Schemas.
        * iLO Redfish conformance Support - Date Time local offset.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.31.0
changelog:
  -     This product addresses an issue the adjustment of firmware read-write commands
      on corresponding OS.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.25.4
changelog:
  -     This product addresses an issue where the adaters isn't recongized with HPE
      Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2  Adapter and HPE Ethernet 10Gb 2-port
      SFP+ X710-DA2 Adapter


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12_11-24-2022
changelog:
  -     This revision of the System ROM improves the system boot time when Restoring
      Default Manufacturing Settings.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.12_11-24-2022
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the latest revision of the AMD
      reference code for AMD 4th Generation EPYC processors which addresses an issue
      of potential over voltage condition early in the boot sequence. This issue is
      not unique to HPE servers.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     See the release document A55_1.20_01_06_2023 in Download Product Binaries page
      from Product Summary of the firmware product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     See the release document A56_1.20_01_06_2023 in Download Product Binaries page
      from Product Summary of the firmware product.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD9
changelog:
  -      Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPDA
changelog:
  -      This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
        * The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
        * Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20
changelog:
  -      Support for Intel 4th Generation Xeon Processors.
        * Support for Intel Virtual RAID on CPU (Intel VROC).
        * Support for SPDM for increased Security with Storage and Network cards.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-19-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where system may hang at POST during TPM measurement after
      restoring manufacturing defaults.
      
      Address an issue where the RegistryVersion format in the URI
      redfish/v1/registrystore/registries did not follow the Redfish Specification.
      If scripts were written to conform with the incorrect format in previous
      System ROMs, those scripts may need to be modified to follow the correct,
      Redfish compliant format which is implemented in this System ROM revision and
      later.
      
      Addressed an issue where the System Configuration (RBSU) option "Access
      Control Service" did not disable PCIe Access Control Service when it's set to
      disabled.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-18-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This is the initial version of the firmware.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.033.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains updates
      aligned with the Intel Best Known Configuration (BKC) WW09.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Updated Server Platform Services (SPS) Firmware to 06.00.04.033.0 to align
      with the Intel Best Known Configuration (BKC) WW09.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.03.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.03
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.04
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.07.06
      
      09.09.20
      
      7.28
      
      0.0


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.04.02
changelog:
  -     The Firmware fixes the following:
      
        * Unsuccessful read of the SFP Temperature which will trigger a Server Shutdown. 
        * Message related to a Mailbox 0x48 Firmware dump saved to buffer.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     Fixed the following behavior:
      
      Temperature Misreading: the adapter was reading incorrect reading of the
      temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small
      Form-factor Pluggable. The symptom would result in a temperature spike and
      potentially reset the system


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -      iLO enablement for new NVIDIA L40 PCIe acceletor
        * iLO enablement for new NVIDIA L4 PCIe accelerator
        * Need disk drive model stringetc for all drives in the server to be provided to COM
        * Hostname to be included in body of Redfish event
        * Enhance the update experience for PLDM Type-A components
        * Improvement on logging related to COM
        * Graceful shutdown support for COM initiated Firmware update
        * SMBIOS modification for High Bandwidth Memory (Intel Xeon CPU Max Series)
        * Supportability Improvement for DIAG Secure Element
        * Granular enable/disable of SNMP V1/V3 version
        * Pending reset flag support for COM initiated Firmware Update
        * Cloud based management enhancements for simplified onboarding
        * MCTP Device handling for FLR and BDF changes runtime for AMD
        * Display DA Drives when the VROC OOB driver is not available in ESXi
        * Enable/Disable IPMI KCS Interface through Redfish API


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40
changelog:
  -      Fixed IPMI SSIF MultiPart Command Failure issue (This enables IPMI utilities on ProLiant RL300 Gen 11 to use the SSIF interface for in-band management)
        * Fixed DIMM temperature reading data issue
        * Fixed The Firmware Update Operation Fail Through OneView for ME issue.
        * Fixed RDE VAS Reports Stack Memory Usage of 96%
        * Fixed the issue of Firmware flash fails during system reboots.
        * Fixed the issue of iLO Recovery from FTP not working
        * Fixed the issue of Hostname property & value missing in most of the REST events logged in Listener.
        * Fixed the issue of iLO UI/REST interfaces inaccessible when attempt to create event subscription during server POST complete.
        * Fixed the issue of Server state is Unmanaged in OV.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.41
changelog:
  -     iLO 6 v1.41 has the same content or feature set as iLO6 1.40 plus an
      additional fix for COM (Compute Ops Management) related to COM4VC bundle
      update message and event. The additional COM related fix is NOT applicable to
      other regular use case scenarios. Hence upgrading to iLO6 v1.41 is optional


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.41
changelog:
  -     Fix provided to have synchronous messages to reflect the status, to Compute
      Ops Management, after completion of server reset during bundle update in
      COM4VC use case scenario.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.45
changelog:
  -      Redfish APIs for iLO, System TPM measurement and SPDM capable option cards measurements. 
          * System TPM measurements are currently supported only on Intel and AMD platforms
          * Install TPM version 1.512 to use for System TPM measurements
        * Supported BIOS versions are Intel U54 v2.10 or later and AMD A55 v1.40 or later
        * Support for Universal Backplane Management Version 7
        * Added support for MCTP Device handling for FLR and BDF changes at runtime.
        * Added support to enable and disable IPMI KCS interface through iLO web interface and iLO Redfish API


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.45
changelog:
  -      Performance issue for Inband IPMI commands over SSIF interface (needs system ROM v1.40)
        * DL380 Gen11 binding vfio-pci driver to Intel E810 NIC causes iLO health monitoring failure
        * Schema Errors reported under /redfish/v1/ComponentIntegrity/
        * Incorrect Tasks status is shown when Redfish delete volume with Long Running Test
        * EDSFF NVMe SPDM Auth fails with iLO 6 1.40 Pass 6/7 Build with error as  (reason Unable to verify Signature)
        * Compute Ops Management for VCenter Reset task is added as BootUEFI(Graceful Shutdown) in the iLO Queue
        * BootToUefi(Graceful Shutdown) is added as Pending Reset task in the iLO Queue
        * During Bundle update one of the component f/w update fails
        * CPU Utilization graph is not updating when CPU is stressed.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -      Added capability in iLO for Two Factor Authentication using OTP (One Time Password) for Microsoft AD users
        * To display drive enclosure info in Firmware tab in iLO
        * Support for controller which goes for functional reset runtime
        * iLO to mark the correct component update status for runtime agent updatable components based on the update status and update result
        * Secure erase of data based on the usecase (customer, factory or openbmc ownership transfer)
        * iLO Support to Reduce AMD Bootup Delay. Reduce the delay by saving the memory trained data to specific location in BIOS SPI memory
        * iLO stops the bundle update in the scenario where BootToUefi task goes to exception to ensure Graceful shutdown of server
        * iLO Support for OBSE in factory mode without the need for Advance License
        * iLO will display Intel CFR Version in Process Information Page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.50
changelog:
  -      OEM iLO component does not show the OEM equivalent entry for Intelligent Provision in One Time Boot Option
        * Handling delayed device discovered in UEFI mode during discovery phase
        * Persist the KCS interface setting across iLO reboots
        * Capability to enable KCS interface setting without needing a factory reset


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.32.3
changelog:
  -     This product correct an issue which the Boot Code Version of the Firmware did
      not get updated after upgrading the Firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product removes CCM(Comprehensive Configuration Management) for the legacy driver.
        * This product adds to support HPE MicroServer Gen11


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.33.3
changelog:
  -      This product fixes the intermittent issue of displaying incorrect device status under iLO web
        * This product fixes the intermittent lost iLO connection with shared networking mode.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.1
changelog:
  -      This product addressed a problem where Reboot Required option was not set after doing firmware update under RBSU.
        * This product addressed the disconnection with iLO after switching to Shared Network mode on BCM5719 OCP3 adapter.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.50
changelog:
  -     This product addresses an issue where the FAN behavior with installed BCM 5719
      1Gb 4p BASE-T OCP Adptr.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type17 memory width showed non-zero for an
      empty DIMM slot.
      
      Addressed an issue where system would RSOD if DesiredBootDevice was set but
      not matched with any boot option.
      
      Addressed an issue where the POST progress bar was shown in the wrong
      position.
      
      Addressed an issue where AGESA PI version did not show in SMBIOS type40.
      
      Corrected Ext Maximum Memory value in SMBIOS entry.
      
      Removed Boot Mode Option from BIOS/Platform Configuration (RBSU) Menu.
      
      Removed unsupported Enhanced Processor Performance Profile from BIOS/Platform
      Configuration (RBSU) Menu.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.22_01-19-2023
changelog:
  -     Add new System Configuration (RBSU) configuration options that allow
      controlling the processor's P0 (maximum) frequency. This includes the "Custom
      Pstate0" option with settings of "Auto" (default) and "Manual" and the
      "Pstate0 Frequency(MHz)" option that allows setting the P0 frequency. When the
      "Custom Pstate0" option is configured for "Manual", the value of the "Pstate0
      Frequency(MHz)" is used for the processor's P0 frequency. When the "Custom
      Pstate0" option is configured for "Auto", the processor uses its normal,
      maximum P0 frequency and the "Pstate0 Frequency(MHz)" option is not
      configurable. In System Configuration (RBSU), these options are located under
      the BIOS/Processor Options. This setting has the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/CustomPstate0
      /redfish/v1/systems/1/bios/settings/Pstate0Frequency
      
      Remove the System Configuration (RBSU) option for "Memory Interleaving Mode".
      This option is no longer configurable because AMD recommends always enabling
      this capability for maximum performance. Memory Interleaving will always be
      enabled with this revision or later of the System ROM no matter how this
      option had been previously configured. In System Configuration (RBSU), this
      option had previously been located under the Memory Options. This setting had
      the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/AmdMemoryInterleaving


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4thGeneration EPYC processors.
      
      This revision of the System ROM updates zlib to 1.2.13 which provides
      mitigation for BIOS security vulnerability documented as CVE-2022-37434
      (https://nvd.nist.gov/vuln/detail/CVE-2022-37434). This security vulnerability
      is documented in the CVE report site.
      
      This revision of the System ROM includes the v1.1.1s openSSL which provides
      mitigation for BIOS security vulnerability documented as CVE-2022-2097
      (https://nvd.nist.gov/vuln/detail/CVE-2022-2097). This security vulnerability
      is documented in the CVE report site.
      
      Addressed an issue where some Chinese translation is missing from RBSU.
      
      Addressed an issue where some Japanese translation is missing from RBSU.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_05-29-2023
changelog:
  -     Reduced system boot time.
      
      Improved the description of Unsupported DIMM Configuration in the Integrated
      Management Log (IML) and POST error message.
      
      Added support for AMD 4th Generation EPYC 9754/9734 Processors.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_05-29-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.7
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.7
      for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type 199 did not have Microcode patch
      information.
      
      Addressed an issue where the xGMI link speed information was not shown on the
      POST screen.
      
      Addressed an issue where NVME drives would require a re-scan after hot-
      add/remove on Windows 2019.
      
      Addressed an issue where the Windows ipmiutil tool may encounter an
      unspecified error.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     Removed "NUMA memory domains per socket" selection item "Auto" from RBSU,
      because value of Auto option is actually set to one memory domain per socket.
      Set display default to "One memory domain per socket".
      
      Added "NVMe PCIe Resource Padding" option under "Advanced PCIe Configuration"
      in RBSU. The option is for fixing a failure to hot add NVMe drive to empty
      slot under OSes such as VMware. The option can be set from Redfish URI
      "/redfish/v1/systems/1/bios/settings/" with property "PciResourcePadding".


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.8
      RC3 for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for and security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where the unsupported DIMM population IML will report an
      incorrect processor number on dual-processor systems.
      
      Addressed an issue where the SMBIOS type 197 might contain an incorrect format
      value of xGMI speed.
      
      Addressed an issue where the CXL root bridge was missing from SMBIOS type 9.
      
      Addressed an issue where dmidecode indicates 4 power supplies are installed
      when only 2 power supplies are actually installed.
      
      Addressed an issue where number of "Internal L3 cache" displayed under RBSU
      information page is not correct.
      
      Addressed an issue where the System Health LED is illuminated Red for all
      memory configuration error cases.  Some memory configuration error cases are
      not critical and should have the System Health LED illuminated Amber.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.42_08-16-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue that can result in a Red Screen of Death (RSOD) and hang
      during system boot or a hang during system boot without an RSOD. This issue
      can occur on systems utilizing the v1.32 or v1.40 System ROM revision and iLO
      Firmware revision v1.50. The v1.32 System ROM added a boot-time reduction
      capability (which also required iLO Firmware revision v1.50) which resulted in
      the boot-time RSOD and/or hang. This capability has been removed in this
      revision of the System ROM.
      
      Addressed an issue where one-time boot did not work properly after setting
      one-time boot device from iLO web or via Redfish.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.20_01-06-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes an updated revision of the AMD
      reference code for AMD 4th Generation EPYC processors.
      
      Addressed an issue where SMBIOS Type17 memory width showed non-zero for empty
      DIMM slot.
      
      Addressed an issue where system would RSOD if DesiredBootDevice was set but
      not matched with any boot option.
      
      Addressed an issue where POST progress bar was shown in the wrong position.
      
      Addressed an issue where AGESA PI version did not show in SMBIOS type40.
      
      Corrected Ext Maximum Memory value in SMBIOS entry.
      
      Removed Boot Mode Option from BIOS/Platform Configuration (RBSU) Menu.
      
      Removed unsupported Enhanced Processor Performance Profile from BIOS/Platform
      Configuration (RBSU) Menu.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_07-12-2023
changelog:
  -     *Important Notes:**
      
      This revision of the System ROM includes AMD reference code GenoaPI 1.0.0.8
      for AMD 4th Generation EPYC processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This revision of the System ROM includes the revision of the OpenSSL library
      1.1.1u update which provides mitigation for and security vulnerabilities
      documented as CVE-2023-2650.
      
      Addressed an issue where the unsupported DIMM population IML will report an
      incorrect processor number on dual-processor systems.
      
      Addressed an issue where the SMBIOS type 197 might contain an incorrect format
      value of xGMI speed.
      
      Addressed an issue where the CXL root bridge was missing from SMBIOS type 9.
      
      Addressed an issue where dmidecode indicates 4 power supplies are installed
      when only 2 power supplies are actually installed.
      
      Addressed an issue where number of "Internal L3 cache" displayed under RBSU
      information page is not correct.
      
      Addressed an issue where the System Health LED is illuminated Red for all
      memory configuration error cases. Some memory configuration error cases are
      not critical and should have the System Health LED illuminated Amber.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.24_03-03-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added capability to support 4th Gen Intel Xeon Scalable Processors MCC.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-01-2023
changelog:
  -     Added capability to support 4th Gen Intel Xeon Scalable Processors 4S.
      
      Enhanced PCI information in Active Health System log.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.30_03-01-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where the Always Power On function would remain off when
      factory defaults are loaded.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_03-23-2023
changelog:
  -     Enhanced error reporting function for Intel Xeon Max Series.
      
      Enhanced Power and Performance Options in ROM-Based Setup Utility.
      
      Added a new feature to support customized iPXE image.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.32_03-23-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Fixed an issue where EDSFF drive was not detected intermittently when system
      started.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     Added support for Agentless Attestation. This security capability allows
      detecting potentially malicious changes to the system by obtaining system
      measurements (which include firmware revisions, configuration settings, and
      the hardware configuration) via the Redfish API.
      
      Added segment value in PCI addresses under RBSU PCI device information.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where a drive cannot be unmounted after hot-plug
      interruption during DPC (Downstream Port Containment) recovery process under
      VMware.
      
      Addressed an issue where Citrix HyperVisor could not be installed.
      
      Addressed an issue where the system would hang in POST if Intel UPI link
      enablement was set to single link operation.
      
      Addressed an issue where the SMBIOS type 38 offset 0x10 had an incorrect
      value.
      
      Addressed an issue where the erase status for SATA drives is reported
      incorrectly when using One Button Secure Erase.
      
      Addressed an issue where location information under RBSU "Storage Device
      Information" page will show "null string" when VROC is enabled.
      
      Addressed an issue where the "Minimum Processor Idle Power Core C-state" from
      RBSU showed an incorrect value when one of "Virtualization - Max Performance",
      "Low Latency", "Transactional Application Processing", "High Performance
      Compute (HPC)" workload profiles is selected.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      Addressed an issue where an incorrect "processor's PUcode" version showed up
      on screen during the POST after downgrading the System ROM.
      
      Addressed an issue where status display of PCIe Root Complex for Intel Quick
      Assist Technology (Intel QAT) is not correct in Windows Device Manger on dual-
      processor systems.
      
      Addressed an issue where the PCI speed might be incorrect when setting
      "Maximum PCI Express Speed" to "Per Port Control".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_07-31-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue with 4th Generation Intel Xeon Processors that can result in
      an unexpected reset with a machine check error logged to the Integrated
      Management Log (IML). This issue is not unique to HPE systems. The following
      is Intel's description of the issue: "Under a complex microarchitectural
      conditions, a hold time violation in the uncore may affect the traffic flowing
      from the Intel Ultra Path Interconnect (UPI) back to a Caching Home Agent
      (CHA) causing a CHA Table of Requests (TOR) timeout (TO) machine check
      exception (MCE) to occur. Due to this erratum, the system may hang." This
      version of the System ROM will update internal code in all installed
      processors when the system boots. This code internal to the processors will
      not be downgraded if the System ROM is downgraded. It is not supported to have
      processors installed with different versions of this internal code.
      
      Addressed an issue where the speed of Kioxia EDSFF drive might be downgraded
      from PCIe Generation 5 to Generation 4.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.40_06-29-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Addressed an issue where a drive cannot be unmounted after hot-plug
      interruption during DPC (Downstream Port Containment) recovery process under
      VMware.
      
      Addressed an issue where Citrix HyperVisor could not be installed.
      
      Addressed an issue where the system would hang in POST if Intel UPI link
      enablement was set to single link operation.
      
      Addressed an issue where the SMBIOS type 38 offset 0x10 had an incorrect
      value.
      
      Addressed an issue where the erase status for SATA drives is reported
      incorrectly when using One Button Secure Erase.
      
      Addressed an issue where location information under RBSU "Storage Device
      Information" page will show "null string" when VROC is enabled.
      
      Addressed an issue where the "Minimum Processor Idle Power Core C-state" from
      RBSU showed an incorrect value when one of Virtualization Max Performance, Low
      Latency, Transactional Application Processing, High Performance Compute (HPC)
      workload profiles is selected.
      
      Addressed an issue where the TPM status between RBSU and iLO web pages were
      not synchronized.
      
      Addressed an issue where an incorrect "processor's PUcode" version showed up
      on screen during the POST after downgrading the System ROM.
      
      Addressed an issue where status display of PCIe Root Complex for Intel Quick
      Assist Technology (Intel QAT) is not correct in Windows Device Manger on dual-
      processor systems.
      
      Addressed an issue where the PCI speed might be incorrect when setting
      "Maximum PCI Express Speed" to "Per Port Control".
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.44_07-31-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      Address an issue with 4th Generation Intel Xeon Processors that can result in
      an unexpected reset with a machine check error logged to the Integrated
      Management Log (IML). This issue is not unique to HPE systems. The following
      is Intels description of the issue: Under a complex microarchitectural
      conditions, a hold time violation in the uncore may affect the traffic flowing
      from the Intel Ultra Path Interconnect (UPI) back to a Caching Home Agent
      (CHA) causing a CHA Table of Requests (TOR) timeout (TO) machine check
      exception (MCE) to occur. Due to this erratum, the system may hang. This
      version of the System ROM will update internal code in all installed
      processors when the system boots. This code internal to the processors will
      not be downgraded if the System ROM is downgraded. It is not supported to have
      processors installed with different versions of this internal code.
      
      Addressed an issue where the speed of Kioxia EDSFF drive might be downgraded
      from PCIe Generation 5 to Generation 4.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.36_05-26-2023
changelog:
  -     *Important Notes:**
      
      None
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      Added new System Configuration (RBSU) configuration options that allow
      controlling Intel OSB function. This includes the "OSB Local/Remote Read"
      option with settings of "Disabled" (default) and "Auto" options that allows
      setting Intel Opportunistic Snoop Broadcast.  When the "OSB Local/Remote Read"
      option is configured for "Disabled", BIOS will disable OSB function. When the
      "OSB Local/Remote Read" option is configured for "Auto", BIOS will
      automatically decides based on silicon compatibility. In System Configuration
      (RBSU), these options are located under the BIOS/Power and Performance
      Options/Intel UPI Options. This setting has the following Redfish properties:
      /redfish/v1/systems/1/bios/settings/OsbLocalRemoteRead
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.04-7.1
changelog:
  -     .
      
      **The following fixes were incorporated in this version:**
      
        * The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.
      
        * The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.
      
        * Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.
      
        * If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p1400922138/v227320/20-D3000-Gen11RN504F_ED1.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 6.0-1.1
changelog:
  -     *The following fixes were incorporated in this version:**
      
        * Code optimization to save memory repo.
      
        * TLB exception seen while doing esp reset when expander reset was in progress.
      
        * Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.
      
        * Added whole new Delta PS-pmbus code , Updated the ESP version number.
      
      Please refer to the _[Release
      Notes_](https://downloads.hpe.com/pub/softlib2/software1/pubsw-
      linux/p762241613/v227384/20-D3000B-Gen11RN600_ED1.html) for the complete
      listing of fixes, enhancements, known issues and work-arounds corresponding to
      this firmware.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD1
changelog:
  -      Adds support for a second source drive pre-amp, and improves reliability with an updated direct offline scan algorithm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD5
changelog:
  -      Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4IASHPK3
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 4IASHPK3-2.1
changelog:
  -      Online drive firmware update available for Smart Array Controllers configured in systems running supported Linux, Microsoft Windows, and VMware environments. All other OSes would require an offline update using the Service Pack for ProLiant and Smart Update Manager.
        * Customers who already installed latest firmware version do not need to update to sub version like (B) (C) (D) etc.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Reverted OCP spec features to maintain compliance to OCP spec commands over NVMe-MI
        * Implemented real Active Measured Latency by adding OCP 2.0 C3 Log page


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG1
changelog:
  -      Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPK4
changelog:
  -      Fix bugs found in the previous version and improve on TTR (Time To Ready) requirement to fix device temporarily not found issue after hot-plug.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG3
changelog:
  -      Improves data integrity
        * Decreases possibility of data corruption in certain error and timing conditions
        * Reduces the probability of hangs and provide a minor performance improvement


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -      Support for LocationIndicatorActive LED for NVMe drive when it is configured behind VROC controller
        * Support for StatusIndicator LED for NVMe drive when it is configured behind VROC controller
        * Support for telemetry streaming using Redfish event subscription


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.51
changelog:
  -      Incorrect reporting of the firmware version of Intel NVMe drives
        * Bundle update issue in case of file download failure for HPE GreenLake Compute Ops Management
        * iLO Two-Factor authentication login fails when AD user login name is used as username for iLO Login instead of AD user display name
        * Incorrect reporting of the Nic card port status from IPMI SDR list
        * Fixing HPE GreenLake Compute Ops Management retry logic to address HPE GreenLake Compute Ops Management status was changing from Connection in progress to Connection failed


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52
changelog:
  -      iLO needs to provide IPv4 address for RDE enabled NIC
        * NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
        * iLO enablement for Intel Ponte Vecchio (PVC) for accelerator manageability and supportability
        * Reduce EDSFF power consumption using NVMe Power States feature
        * iLO enhancements to support SMBIOS 3.86 spec (type 197 and 242)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.52
changelog:
  -      Increased the maximum boot order to 512 as specified by UEFI EV specification
        * Incorrect sensor values for some sub-components in IPMI response
        * The "Ignore" option for the "Global Component Integrity" security parameter in the iLO Security Dashboard gets automatically disabled
        * The discrepancy between M.2 Slot Name with Redfish URI and iLO GUI is removed. The product name getting from backend will be displayed in redfish and UI as well
        * Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters
        * Removal of duplicate sensor entries from IPMI response
        * UefiDevicePath length increased from 256 bytes to 1024 bytes


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.53
changelog:
  -      Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
        * Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.70
changelog:
  -     This product addresses an issue where Loses IP Address Randomly during AC/DC
      cycle and idling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Added support for for Local Key Management SED adapter password.
        * Added support for reporting surface scan metrics for SSA, SSACLI.
        * Added support for improving secure erase time for disks supporting the WRITE SAME command.
        * Added support for a new persistent event log policy that overwrites old events with the most recently occurred events.
        * Added support PLDM firmware update
        * Added support PLDM firmware update for UBM.
        * Enable Redfish Name property of Volume resource which is optional on create. The value is the same as DisplayName property.
        * Report VendorID, ProductID and location informations for enclosure SEPs.
        * Redfish POST request to perform the Drive.Actions.#SecureErase ACTION will be rejected with the extended error message ResourceInUse if the targeted Drive is a SED that is not in the original factory state(OFS).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 5.61
changelog:
  -      Fixed an issue where to create RAID 60 on 24 SATA SSDs resulted in controller lockup.
        * Fixed a performance drop issue on RAID 5 logical drives with 50/50 cache ratio on a 256K sequential read workload.
        * Fixed a parity inconsistency after RAID rebuild restarted with a new drive replacement.
        * Fixed an issue where a transforming logical drive fails when the controller is abruptly rebooted after logical drive deletion.
        * Fixed an issue where the logical drive failed during the heal array transformation.
        * Fixed an issue where rebuild does not start on an array with the spare disk.
        * Fixed an issue where the VDM requests were not being serviced in a timely manner when the controller was under high load.
        * Fixed controller lockup during clear configuration after SmartCache logical drive is moved from P-Series to E-Series controller.
        * Fixed an issue where not all permitted values were published to the WriteCachePolicy@Redfish.AllowableValues in VolumeCapabilities.
        * Fixed an issue where the VolumeCapabilities resource can be published with incorrect values for WriteCachePolicy@Redfish.AllowableValues when the controller's battery is charging.
        * Fixed an issue where the ControllerPasswordAccepted Redfish alert was sent with incorrect ControllerPasswordEntered messageId.
        * Fixed an issue where a drive's ServiceLabel is sometimes erroneously published with a leading zero on its Port number.
        * Fixed an issue where Redfish alerts generated early in the boot sequence were not reported to iLO.
        * Fixed an issue where a Redfish Volume create request is erroneously accepted when the request payload contains a WriteCachePolicy value conflicting with the existing cache configuration.
        * Fixed an issue where the ControllerPreviousError alert was sent with incorrect ControllerPreviouseFailure messageId and severity.
        * Fixed an issue where the BatteryCharging alert was sent with an incorrect severity on certain controllers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2023.09.01
changelog:
  -     This Firmware package contains following firmware versions:
      
      **Adapter**
      
      **Speed**
      
      **MBI**
      
      **Firmware**
      
      **UEFI**
      
      **Boot Bios**
      
      HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter
      
      32Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter
      
      64Gb
      
      02.08.05
      
      09.12.01
      
      7.34
      
      0.0
      
      Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled
      and will not require a server reboot to apply.
      
      Added support for:
      
      RedHat Enterprise Linux 8.8
      
      RedHat Enterprise Linux 9.2
      
      SuSE Linux Enterprise Server 15 SP5


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPG6
changelog:
  -      Update maximum continuous operation temperature values for host thermal management and reporting.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> HPD2
changelog:
  -      Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.53
changelog:
  -      Added support for Qualcomm X100
        * Added enhanced support to iLO firmware to report additional description about the components for HPE GreenLake Compute Ops Management initiated firmware bundle update
        * Added support to enable or disable User Accounts through Redfish and iLO web interface
        * In-band IPMI support for HPE ProLiant RL300 Gen11 servers (RHEL 8.6)
        * For PLDM components, added support to selectively update the target devices on the system through Install Sets and Task Queue


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54
changelog:
  -      Gracefully handle multiple boot to UEFI commands in installset
        * Provide update statistics via Redfish for firmware bundle update
        * Redfish includes direct attach backplane in chassis collection
        * Redfish includes downstream backplane in chassis collection
        * Providing granular control on Security Parameters present on Security Dashboard
        * Intel VROC 8.2 support
        * Basic enablement of NVIDIA H100 94GB GPU


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.54
changelog:
  -      Fix has been implemented to show right data in redfish, which includes to suppress additional SetObject name when adapter provides expanded data for GET operation in RDE
        * Excessive event issue is fixed when RDE and DCi coexist on the system on iLO 5 and iLO 6
        * iLO Login page shows the Server as Managed by HPE OneView when actually the Server is in Monitored mode


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 1.55
changelog:
  -      Slowness due to continuously polling on timer expiry leading to increased CPU utilization
        * Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
        * Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
        * Existing subscriptions with HPE GreenLake for Compute Ops Management and HPE OneView is corrupt after upgrade to iLO 6 v1.54
        * PSU firmware upgrade flashing failure for Titanium PSUs


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.34.70
changelog:
  -     This product addresses an issue where network loses IP Address Randomly during
      AC/DC cycle and idling.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 2.35.3
changelog:
  -      This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
        * This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.04.075.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for Intel Sapphire Rapids.
      
      **Firmware Dependencies:**
      
      None
      
      **Enhancements/New Features:**
      
      This version contains the latest Server Platform Services firmware for Intel
      Sapphire Rapids.
      
      **Known Issues:**
      
      None


author: HP Linux Development <Linux_SWdeliverables@external.groups.hpe.com> 06.00.05.046.0
changelog:
  -     *Important Notes:**
      
      This version of the Server Platform Services (SPS) Firmware contains the
      latest package for 4th Generation Intel Xeon Scalable Processors.
      
      **Firmware Dependencies:**
      
      None
      
      **Problems Fixed:**
      
      This version contains the latest Server Platform Services firmware for 4th
      Generation Intel Xeon Scalable Processors.
      
      **Known Issues:**
      
      None


