Updating firmware by installing the rpm:

• Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.
• The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the first step above.  
• To install firmware, you can execute ONE of the following commands:
  • ./CP<nnnnnn>.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
  • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
• To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

• Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
• Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location and run ./setup to update the firmware. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the step above.
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

• Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
• Place the desired firmware to be updated in the directory, /packages on the USB key.
• Boot from the newly created Service Pack for Proliant USB key.
• Follow Smart Update Manager steps to complete firmware update.

Online:

• Login as root. (You must be root in order to apply the ROM update.)
• Place the desired firmware to be updated in the directory, /packages.
• Run launch_sum.sh script which is found in the root of the ISO.

Follow the instructions on the screen.

Updating firmware by installing the rpm:

• Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.
• The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the first step above.  
• To install firmware, you can execute ONE of the following commands:
  • ./CP<nnnnnn>.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
  • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
• To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

• Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
• Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location and run ./setup to update the firmware. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the step above.
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

• Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
• Place the desired firmware to be updated in the directory, /packages on the USB key.
• Boot from the newly created Service Pack for Proliant USB key.
• Follow Smart Update Manager steps to complete firmware update.

Online:

• Login as root. (You must be root in order to apply the ROM update.)
• Place the desired firmware to be updated in the directory, /packages.
• Run launch_sum.sh script which is found in the root of the ISO.

Follow the instructions on the screen.

Updating firmware by installing the rpm:

• Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.
• The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the first step above.  
• To install firmware, you can execute ONE of the following commands:
  • ./CP<nnnnnn>.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
  • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
• To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

• Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
• Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location and run ./setup to update the firmware. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the step above.
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

• Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
• Place the desired firmware to be updated in the directory, /packages on the USB key.
• Boot from the newly created Service Pack for Proliant USB key.
• Follow Smart Update Manager steps to complete firmware update.

Online:

• Login as root. (You must be root in order to apply the ROM update.)
• Place the desired firmware to be updated in the directory, /packages.
• Run launch_sum.sh script which is found in the root of the ISO.

Follow the instructions on the screen.

Updating firmware by installing the rpm:

• Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.
• The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the first step above.  
• To install firmware, you can execute ONE of the following commands:
  • ./CP<nnnnnn>.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
  • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
• To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

• Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
• Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location and run ./setup to update the firmware. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the step above.
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

• Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
• Place the desired firmware to be updated in the directory, /packages on the USB key.
• Boot from the newly created Service Pack for Proliant USB key.
• Follow Smart Update Manager steps to complete firmware update.

Online:

• Login as root. (You must be root in order to apply the ROM update.)
• Place the desired firmware to be updated in the directory, /packages.
• Run launch_sum.sh script which is found in the root of the ISO.

Follow the instructions on the screen.

Updating firmware by installing the rpm:

• Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location.
• The CP<nnnnnn>.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the first step above.  
• To install firmware, you can execute ONE of the following commands:
  • ./CP<nnnnnn>.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
  • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.
• To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension.

Updating firmware without installing the rpm:

• Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory.
• Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-hdd-<xxxxxxxxxx>-*' location and run ./setup to update the firmware. The actual name of the 'firmware-hdd-<xxxxxxxxxx>-*' folder is based on the version of the rpm installed in the step above.
• The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory.

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

• Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
• Place the desired firmware to be updated in the directory, /packages on the USB key.
• Boot from the newly created Service Pack for Proliant USB key.
• Follow Smart Update Manager steps to complete firmware update.

Online:

• Login as root. (You must be root in order to apply the ROM update.)
• Place the desired firmware to be updated in the directory, /packages.
• Run launch_sum.sh script which is found in the root of the ISO.

Follow the instructions on the screen.

rpmのインストールによりファームウェアをアップデート：

• コマンド rpm -ivh を使用して、ファームウェアrpmをインストールします：  これは、'/usr/lib/x86_64-linux-gnu'へrpmの内容を抽出します。
• CP.scexeスクリプトは、scexe-compatフォルダーにあります。firmware-hdd--*フォルダーの実際の名前は、上記の最初のステップでインストールされるrpmのバージョンに基づきます。 
• ファームウェアをインストールするために、以下のコマンドの1つを実行することができます：
  • /usr/lib/x86_64-linux-gnu/scexe-compatロケーションの./CP.scexe（または）
  • /usr/lib/x86_64-linux-gnu/firmware-hdd--*ロケーションの./setup
• ファームウェアアップグレードの結果は、/var/cpq/ディレクトリにあるComponent.logファイルに保存されます。
• rpmをアンストールするには、コマンド：rpm -e （.rpm拡張子のついていないrpmファイル名）を実行します。

rpmのインストールなしでのファームウェアのアップデート：

• Rpmの内容を次のコマンドを用いて抽出します。rpm2cpio .rpm | cpio -id  これは、現在のディレクトリの'usr'フォルダーへrpmの内容を抽出します。
• usr/lib/x86_64-linux-gnu/firmware-hdd--*ロケーションに移動し、./setupを実行してファームウェアをアップデートします。firmware-hdd--*フォルダーの実際の名前は、上記のステップでインストールされるrpmのバージョンに基づきます。
• ファームウェアアップグレードの結果は、/var/cpq/ディレクトリにあるComponent.logファイルに保存されます。

追加情報：

ファームウェアrpmパッケージのインストール (rpm -ivh)は、ファームウェアをアップデートしません。  単に、ローカルシステムへのrpmの内容を解凍するだけです。ローカルシステムのファームウェアをアップデートするには、上記の手順に従う必要があります。

Smart Update Managerを使用するには、Service Pack for ProLiantから以下の手順に従ってください:

オフライン：

• USB Key Utility for Windowsを使用して、Service Pack for ProLiant をUSBキーにコピーします。
• アップデートするファームウェアをUSBキーの/packagesディレクトリにコピーします。
• 新たに作成した Service Pack for ProLiant USBキーから起動します。
• HP Smart Update Managerの指示に従ってファームウェアのアップデートを行います。

オンライン：

• rootとしてログインします。（ROMアップデートを適用するにはrootとしてログインする必要があります）
• アップデートするファームウェアを/packagesディレクトリにコピーします。
• ISOのルートにあるlaunch_sum.shスクリプトを実行します。

画面の指示に従います。