system environment/kernel

Jump to letter: [ CFHK ]

kmod-hpqlgc-qlcnic - hpqlgc-qlcnic kernel module(s)

Website: http://www.qlogic.com
License: GPLv2
Vendor: hpqlgc
Description:
This package provides the hpqlgc-qlcnic kernel modules built for
the Linux kernel 2.6.32-358.el6.x86_64 for the x86_64
family of processors.

Public key available at http://ldriver.qlogic.com/RPM-public-key/
SRPMS available at http://ldriver.qlogic.com/driver-srpms/

Packages

kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u4.x86_64 [470 KiB] Changelog by QLogic Corp (2013-04-23): 
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
  Defect/Enhancement: Defect
  Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
  Change  : Fixed a bug in the driver which was preventing LRO settings
            through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
  Introduced : Day one
  Impact  : HW: All supported Hardware
            OS: RHEL6.4
            FW: N/A
            OtherSW: N/A


Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
  Defect/Enhancement: Enhancement
  Problem: There is no way to tune max_rss on sles11sp2 kernel
  Change: Added sysfs interface max_rss to configure rss
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: sles11sp2
          FW: N/A
          OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
  Defect/Enhancement: Defect
  Problem: External loopback test pass without any cable plugged
  Change: Sysfs interface for external loopback has been modified  
          to return failure status when no cable present
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: SLES11 SP2
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
  Defect/Enhancement: Enhancement
  Problem: AvSecure does not display driver version
  Change: Added support for a new CDRP command to provide driver version
          string to firmware
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
  Defect/Enhancement: Enhancement
  Problem: On newer distributions those are upstream kernel based
           have ethtool user interface for the minidump operations.
	   so we have to add ethtool support in ql_dump.sh tool
  Change: Added ethtool interface support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
  Defect/Enhancement: Enhancement
  Problem: ql_dump do not have minidump operations support for storage drivers
  Change: Added storage drivers support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
  Defect/Enhancement: Defect
  Problem: If a vlan is inband in a packet then driver use to calculate
           incorrect protocol which lead to checksum errors in firmware.
  Change: Fixed the protocol calculation in case of inband vlan.
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
  Defect/Enhancement: Defect
  Problem: Invalid error messages seen in dmesg while running ethtool stats.
  Change: Fixed unsupported CDRP command error message.
  Introduced: 5.0.28
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]
kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u3.x86_64 [476 KiB] Changelog by QLogic Corp (2013-04-23): 
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
  Defect/Enhancement: Defect
  Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
  Change  : Fixed a bug in the driver which was preventing LRO settings
            through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
  Introduced : Day one
  Impact  : HW: All supported Hardware
            OS: RHEL6.4
            FW: N/A
            OtherSW: N/A


Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
  Defect/Enhancement: Enhancement
  Problem: There is no way to tune max_rss on sles11sp2 kernel
  Change: Added sysfs interface max_rss to configure rss
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: sles11sp2
          FW: N/A
          OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
  Defect/Enhancement: Defect
  Problem: External loopback test pass without any cable plugged
  Change: Sysfs interface for external loopback has been modified  
          to return failure status when no cable present
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: SLES11 SP2
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
  Defect/Enhancement: Enhancement
  Problem: AvSecure does not display driver version
  Change: Added support for a new CDRP command to provide driver version
          string to firmware
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
  Defect/Enhancement: Enhancement
  Problem: On newer distributions those are upstream kernel based
           have ethtool user interface for the minidump operations.
	   so we have to add ethtool support in ql_dump.sh tool
  Change: Added ethtool interface support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
  Defect/Enhancement: Enhancement
  Problem: ql_dump do not have minidump operations support for storage drivers
  Change: Added storage drivers support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
  Defect/Enhancement: Defect
  Problem: If a vlan is inband in a packet then driver use to calculate
           incorrect protocol which lead to checksum errors in firmware.
  Change: Fixed the protocol calculation in case of inband vlan.
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
  Defect/Enhancement: Defect
  Problem: Invalid error messages seen in dmesg while running ethtool stats.
  Change: Fixed unsupported CDRP command error message.
  Introduced: 5.0.28
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]
kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u2.x86_64 [476 KiB] Changelog by QLogic Corp (2013-04-23): 
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
  Defect/Enhancement: Defect
  Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
  Change  : Fixed a bug in the driver which was preventing LRO settings
            through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
  Introduced : Day one
  Impact  : HW: All supported Hardware
            OS: RHEL6.4
            FW: N/A
            OtherSW: N/A


Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
  Defect/Enhancement: Enhancement
  Problem: There is no way to tune max_rss on sles11sp2 kernel
  Change: Added sysfs interface max_rss to configure rss
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: sles11sp2
          FW: N/A
          OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
  Defect/Enhancement: Defect
  Problem: External loopback test pass without any cable plugged
  Change: Sysfs interface for external loopback has been modified  
          to return failure status when no cable present
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: SLES11 SP2
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
  Defect/Enhancement: Enhancement
  Problem: AvSecure does not display driver version
  Change: Added support for a new CDRP command to provide driver version
          string to firmware
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
  Defect/Enhancement: Enhancement
  Problem: On newer distributions those are upstream kernel based
           have ethtool user interface for the minidump operations.
	   so we have to add ethtool support in ql_dump.sh tool
  Change: Added ethtool interface support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
  Defect/Enhancement: Enhancement
  Problem: ql_dump do not have minidump operations support for storage drivers
  Change: Added storage drivers support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
  Defect/Enhancement: Defect
  Problem: If a vlan is inband in a packet then driver use to calculate
           incorrect protocol which lead to checksum errors in firmware.
  Change: Fixed the protocol calculation in case of inband vlan.
  Introduced: Day one
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
  Defect/Enhancement: Defect
  Problem: Invalid error messages seen in dmesg while running ethtool stats.
  Change: Fixed unsupported CDRP command error message.
  Introduced: 5.0.28
  Impact: HW: All Supported Hardware
	  OS: All supported Linux flavors
	  FW: N/A
	  OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]

Listing created by Repoview-0.6.6-2.fc17