FILE NAME: CP017425.scexe TITLE: HP Online Firmware Upgrade Utility for Intel adapters on Linux x86 VERSION: 1.3.6 REVISION: 0 LANGUAGE: English CATEGORY: Software Solutions DIVISIONS: Enterprise and Mainstream Servers EFFECTIVE DATE: 11/21/2012 SUPERSEDES: CP017193.scexe Products Affected ================== HP Ethernet 1Gb 4P 366FLR Adapter HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter HP Ethernet 10Gb 2-port 560M Adapter HP Ethernet 10Gb 2-port 560SFP+ Adapter HP Ethernet 10Gb 2-port 560FLB Adapter HP Ethernet 1Gb 2-port 361i Adapter HP Ethernet 1Gb 2-port 361T Adapter HP Ethernet 1Gb 2-port 361FLB Adapter HP Ethernet 1Gb 4-port 366i Adapter HP Ethernet 1Gb 4-port 366M Adapter Operating Systems ================== Red Hat Enterprise Linux 6 Update 3 for x86 Red Hat Enterprise Linux 6 Update 2 for x86 Red Hat Enterprise Linux 6 Update 1 for x86 Red Hat Enterprise Linux 5 Update 9 for x86 Red Hat Enterprise Linux 5 Update 8 for x86 Red Hat Enterprise Linux 5 Update 7 for x86 SUSE LINUX Enterprise Server 11 Service Pack 2 for x86 SUSE LINUX Enterprise Server 11 Service Pack 1 for x86 SUSE LINUX Enterprise Server 10 Service Pack 4 for x86 Pre-requisites =============== ProLiant server supporting above operating systems 2GB RAM minimum hp-igb source rpm >= 3.1.16-3 Description ============ This scexe contains the utilities and binaries for upgrading Firmware on HP Proliant Intel adapters on server running any of the supported OS versions above Enhancements/Fixes =================== 1) Added support for HP Ethernet 1Gb 4P 366FLR Adapter 2) Added support for HP Ethernet 10Gb 2-port 560FLR-SFP+ Adapter 3) Added support for HP Ethernet 10Gb 2-port 560M Adapter 4) Added support for Red Hat Enterprise Linux 5 Update 9 Table of Contents ================= Introduction Packaging Performing the Firmware Upgrade Firmware Upgrade Log Introduction ============ This file describes the procedure to use for upgrading firmware on HP network adapters mentioned in the PRODUCTS AFFECTED section of this document. User guides and additional HP Network Adapter information can be found at: http://h18004.www1.hp.com/products/servers/networking/index-nic.html Packaging ========= This firmware upgrade utility is released in SCEXE format. The file is a single self-extracting executable that unpacks the component, runs it, and cleans up. This one-step process replaces the rpm format which would require three steps to install, execute and remove. Performing the Firmware Upgrade =============================== 1. This utility requires the hp-igb KMP to be built and installed using the source rpm version >= 3.1.16-3. Refer the text file that accompanies hp-igb source rpm for instructions to build and install 2. igb driver module must be installed and interfaces recognized 3. Firmware can be upgraded interactively using following command: # ./CP00xxxx.scexe 4. The help menu lists all available command line options. # ./CP00xxxx.scexe -h Firmware Upgrade Log ==================== Results of the firmware upgrade are written to bootutil.log which gets saved in the current working directory. Copyright 2011 Hewlett-Packard Development Company, L.P. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies