| kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u4.i686
[453 KiB] |
Changelog
by QLogic Corp (2013-04-23):
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
Defect/Enhancement: Defect
Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
Change : Fixed a bug in the driver which was preventing LRO settings
through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
Introduced : Day one
Impact : HW: All supported Hardware
OS: RHEL6.4
FW: N/A
OtherSW: N/A
Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
Defect/Enhancement: Enhancement
Problem: There is no way to tune max_rss on sles11sp2 kernel
Change: Added sysfs interface max_rss to configure rss
Introduced: Day one
Impact: HW: All Supported Hardware
OS: sles11sp2
FW: N/A
OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
Defect/Enhancement: Defect
Problem: External loopback test pass without any cable plugged
Change: Sysfs interface for external loopback has been modified
to return failure status when no cable present
Introduced: Day one
Impact: HW: All Supported Hardware
OS: SLES11 SP2
FW: N/A
OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
Defect/Enhancement: Enhancement
Problem: AvSecure does not display driver version
Change: Added support for a new CDRP command to provide driver version
string to firmware
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
Defect/Enhancement: Enhancement
Problem: On newer distributions those are upstream kernel based
have ethtool user interface for the minidump operations.
so we have to add ethtool support in ql_dump.sh tool
Change: Added ethtool interface support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
Defect/Enhancement: Enhancement
Problem: ql_dump do not have minidump operations support for storage drivers
Change: Added storage drivers support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
Defect/Enhancement: Defect
Problem: If a vlan is inband in a packet then driver use to calculate
incorrect protocol which lead to checksum errors in firmware.
Change: Fixed the protocol calculation in case of inband vlan.
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
Defect/Enhancement: Defect
Problem: Invalid error messages seen in dmesg while running ethtool stats.
Change: Fixed unsupported CDRP command error message.
Introduced: 5.0.28
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]
|
| kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u3.i686
[462 KiB] |
Changelog
by QLogic Corp (2013-04-23):
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
Defect/Enhancement: Defect
Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
Change : Fixed a bug in the driver which was preventing LRO settings
through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
Introduced : Day one
Impact : HW: All supported Hardware
OS: RHEL6.4
FW: N/A
OtherSW: N/A
Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
Defect/Enhancement: Enhancement
Problem: There is no way to tune max_rss on sles11sp2 kernel
Change: Added sysfs interface max_rss to configure rss
Introduced: Day one
Impact: HW: All Supported Hardware
OS: sles11sp2
FW: N/A
OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
Defect/Enhancement: Defect
Problem: External loopback test pass without any cable plugged
Change: Sysfs interface for external loopback has been modified
to return failure status when no cable present
Introduced: Day one
Impact: HW: All Supported Hardware
OS: SLES11 SP2
FW: N/A
OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
Defect/Enhancement: Enhancement
Problem: AvSecure does not display driver version
Change: Added support for a new CDRP command to provide driver version
string to firmware
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
Defect/Enhancement: Enhancement
Problem: On newer distributions those are upstream kernel based
have ethtool user interface for the minidump operations.
so we have to add ethtool support in ql_dump.sh tool
Change: Added ethtool interface support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
Defect/Enhancement: Enhancement
Problem: ql_dump do not have minidump operations support for storage drivers
Change: Added storage drivers support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
Defect/Enhancement: Defect
Problem: If a vlan is inband in a packet then driver use to calculate
incorrect protocol which lead to checksum errors in firmware.
Change: Fixed the protocol calculation in case of inband vlan.
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
Defect/Enhancement: Defect
Problem: Invalid error messages seen in dmesg while running ethtool stats.
Change: Fixed unsupported CDRP command error message.
Introduced: 5.0.28
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]
|
| kmod-hpqlgc-qlcnic-5.0.29.5-1.rhel6u2.i686
[464 KiB] |
Changelog
by QLogic Corp (2013-04-23):
Version 5.0.29.5 (HP NCDE 10.80)
- Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
Defect/Enhancement: Defect
Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
Change : Fixed a bug in the driver which was preventing LRO settings
through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
Introduced : Day one
Impact : HW: All supported Hardware
OS: RHEL6.4
FW: N/A
OtherSW: N/A
Version 5.0.29.4 (HP NCDE 10.80)
- Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]
Defect/Enhancement: Enhancement
Problem: There is no way to tune max_rss on sles11sp2 kernel
Change: Added sysfs interface max_rss to configure rss
Introduced: Day one
Impact: HW: All Supported Hardware
OS: sles11sp2
FW: N/A
OtherSW: N/A
Version 5.0.29.3 (HP NCDE 10.70)
- External loopback test pass without any cable plugged.[ER0000000097412]
Defect/Enhancement: Defect
Problem: External loopback test pass without any cable plugged
Change: Sysfs interface for external loopback has been modified
to return failure status when no cable present
Introduced: Day one
Impact: HW: All Supported Hardware
OS: SLES11 SP2
FW: N/A
OtherSW: N/A
Version 5.0.29.2
- OCBB: set driver version in firmware [ER0000000096369]
Defect/Enhancement: Enhancement
Problem: AvSecure does not display driver version
Change: Added support for a new CDRP command to provide driver version
string to firmware
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29.1
- Added ethtool support in ql_dump.sh [ER0000000090277]
Defect/Enhancement: Enhancement
Problem: On newer distributions those are upstream kernel based
have ethtool user interface for the minidump operations.
so we have to add ethtool support in ql_dump.sh tool
Change: Added ethtool interface support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Added storage driver support in ql_dump.sh [ER0000000090278]
Defect/Enhancement: Enhancement
Problem: ql_dump do not have minidump operations support for storage drivers
Change: Added storage drivers support in ql_dump.sh for minidump
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.29
- Fixed inband vlan tx path issue. [ER0000000093690].
Defect/Enhancement: Defect
Problem: If a vlan is inband in a packet then driver use to calculate
incorrect protocol which lead to checksum errors in firmware.
Change: Fixed the protocol calculation in case of inband vlan.
Introduced: Day one
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
- Fixed unsupported CDRP command error message. [ER0000000092873].
Defect/Enhancement: Defect
Problem: Invalid error messages seen in dmesg while running ethtool stats.
Change: Fixed unsupported CDRP command error message.
Introduced: 5.0.28
Impact: HW: All Supported Hardware
OS: All supported Linux flavors
FW: N/A
OtherSW: N/A
Version 5.0.28.1 (HP NCDE 10.65)
- https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]
Version 5.0.28
- P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
- The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
- Support for ql_dump.sh to configure and extract minidump [ER0000000092362]
|