Jump to letter: [
CFHKM
]
hp-netxtreme2 - HP NC-Series Broadcom 1/10 GbE Multifunction Drivers for Linux
- Description:
"This package contains the Broadcom NetXtreme II 1-Gigabit (bnx2) and 10-Gigabit (bnx2x) ethernet drivers."
Packages
hp-netxtreme2-7.4.25-2.src
[2.1 MiB] |
Changelog
by HP Linux SW Deliverables (2012-10-17):
- This package installs/updates the following driver versions:
*** cnic v2.5.12e ***
- Fixes a kernel panic under iSCSI out-of-order condition (Severity: Critical)
- Fixes an issue where iSCSI does not resume after MTU change on bnx2x
driven adapters (Severity: Medium)
- Fixes a bnx2x assert due to corrupted TCP NOP instruction during iSCSI
traffic (Severity: Medium)
*** bnx2 v2.2.3e ***
- Adds recovery logic to recover from PCI block reset during TX timeout
(Severity: Medium)
- Fixes an issue where wrong DMA address was being unmapped on IOMMU based
systems on doing a reset during heavy traffic (Severity: Medium)
*** bnx2x v1.74.17 ***
- Adds support for HP Ethernet 10Gb 2-port 530T Adapter (Severity: Critical)
- Display warnings when unsupported SFP modules are used (Severity: Minor)
- Removed unsupported module parameter tx_switching (Severity: Minor)
- Adds support for ethtool to be able to get and set hash settings
(Severity: Minor)
- Sets link and supported speeds appropriately for SFP (1G) optic module
(Severity: Medium)
- Adds support for SW timestamping in transmit and ethtool capability to
query timestamp (Severity: Minor)
- Fixes ethtool -t error reporting issues (Severity: Medium)
- Fixes ethtool -t failure during heavy traffic (Severity: Minor)
- Fixes issue with ethtool displaying previous speed/duplex on link down
(Severity: Minor)
- Fixes a possible crash when doing ethtool -L with cnic up (Severity: Minor)
- Fixes ethtool -A failure to change pause parameters correctly
(Severity: Medium)
- Fixes an issue that leads to kernel crash in low memory conditions either
on driver unload, ifdown of interface or changing device parameters
(Severity: Critical)
- Fixes an issue on bringing up NC532x device with single MSI-X vector
(Severity: Medium)
- Fixes an issue with creating VLANs on RHEL6.3 (Severity: Critical)
- Fixes an issue with driver load failure due to memory shortage in
multi-function mode (Severity: Critical)
- Fixes a possible crash with ethtool -d on 530x devices (Severity: Medium)
|
hp-netxtreme2-7.2.55-2.src
[2.1 MiB] |
(no changelog entry)
|
hp-netxtreme2-7.0.39-2.src
[2.0 MiB] |
(no changelog entry)
|
hp-netxtreme2-7.0.36-2.src
[2.0 MiB] |
(no changelog entry)
|
hp-netxtreme2-6.2.23-2.src
[1.9 MiB] |
(no changelog entry)
|